CALL TODAYLOGINCart(0)$0.00

High Density Servers

 
  • 1029P-N32R
    1029P-N32R
    Please Inquire
    SKU
    SYS-1029P-N32R 
    Processor
    CPU:
    Dual Socket P (LGA 3647)
    2nd Gen. Intel® Xeon® Scalable Processors (Cascade Lake/Skylake),
    3 UPI up to 10.4GT/s
    Support CPU TDP up to 140W
     
    Cores:
    Up to 22 Cores
     
    Note:
    BIOS version 3.0a or above is required to support 2nd Gen. Intel® Xeon® Scalable processors
     
    Memory
    Memory Capacity:
    24 DIMM slots
    Up to 6TB 3DS ECC DDR4-2933MHz RDIMM
    Supports Intel® Optane™ DCPMM
     
    Memory Type:
    2933/2666/2400/2133MHz ECC DDR4 RDIMM
     
    Note:
    2933MHz in two DIMMs per channel can be achieved by using memory purchased from Supermicro
    Cascade Lake only. Contact your Supermicro sales rep for more info.
     
    Chassis
    1U Rackmount Chassis
     
    Dimensions
    Height:
    1.7" (43mm)
     
    Width:
    17.26" (438mm)
     
    Depth:
    35.95" (913mm)
     
    Front Panel
    Buttons:
    Power On/Off button
    UID button
     
    LEDs:
    Power LED
    Hard drive activity LED
    Network activity LEDs
    System Overheat LED / Fan fail LED /
    UID LED
     
    Bios
    BIOS Type:
    AMI 32Mb SPI Flash ROM
     
    Onboard Devices
    Chipset:
    Intel® C627 chipset
     
    Network Connectivity:
    Intel® X550 Dual Port 10GBase-T
     
    IPMI:
    Support for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
     
    Graphics:
    ASPEED AST2500 BMC
     
    HDD Drive Bays
    Hot-swap:
    Dual Drawer/Tray with a total of 32 NVMe 2.5" SSDs
     
    Expansion Slots
    PCI-Express:
    2 PCI-E 3.0 x16 Low-profile slots
     
    M.2:
    M.2 Interface: 2 PCI-E 3.0 x2, RAID 0, 1
    M.2 Form Factor: 2260/2280/22110
    M.2 Key: M-Key
     
    Power Supply
    1000 / 1600W 1U Redundant Power Supply
     
    Total Output Power:
    1000W / 1600W
     
    Dimension (W x H x L):
    73.5 x 40 x 185 mm
     
    Input:
    100 -- 127Vac / 13.8A / 47-63Hz
    200 -- 240Vac / 9.6A / 47-63Hz
    200 -- 240Vdc / 8.5A (CCC Only)
     
    +12V:
    Max: 83A / Min: 0A (1000W)
    Max: 132A / Min: 0A (1600W)
     
    12Vsb:
    Max: 2.1A / Min: 0A
     
    Output Type:
    Gold Finger
     
    Certification:
    Platinum Level Certified
     
    Input Output
    LAN:
    2 RJ45 10GBase-T ports
    1 RJ45 Dedicated IPMI LAN port
     
    USB:
    2 USB 3.0 ports (rear)
     
    Video:
    1 VGA port
    Serial Header
    1 COM port (header)
     
    Cooling
    8x 40x56mm PWM fans
     
    Operating Environment
    RoHS:
    RoHS Compliant
     
    Environmental Spec.:
    Operating Temperature:
       10°C ~ 30°C (50°F ~ 86°F)
    Non-operating Temperature:
       -40°C to 60°C (-40°F to 140°F)
    Operating Relative Humidity:
       8% to 90% (non-condensing)
    Non-operating Relative Humidity:
       5% to 95% (non-condensing)
     
    Details
    Software:
    Intel® Node Manager
    IPMI 2.0
    KVM with dedicated LAN
    NMI
    SSM, SPM, SUM
    SuperDoctor® 5
    Watch Dog
     
    Power Configurations:
    ACPI / APM Power Management
     
  • 2015TA-HTRF
    2015TA-HTRF
    $3,145.00
    SKU
    2015TA-HTRF 
    Processor
    CPU:
    Intel® Atom™ D525 processor
    System Bus:
    DMI
     
    Memory
    (per node)
    Memory Capacity:

    Two 204-pin SO-DIMM sockets
    Up to 4GB unbuffered non-ECC DDR3 800MHz SO-DIMM (Single Channel)
    Memory Type:    
    DDR3 800MHz unbuf., non-ECC SO-DIMM
    DIMM Sizes:
    2 GB, 1 GB, 512 MB, 256 MB
    Memory Voltage:
    1.5V only
     
    Chassis
    2U Rackmount
     
    Dimensions
    Height:
    3.47" (88mm)
    Width:
    17.25" (438mm)
    Depth:
    26.75" (679mm)
    Gross Weight:
    85 lbs (38.6kg)
    Available Colors:
    Black
     
    Front Panel
    (per hot-swap tray)
    Buttons:

    Power On/Off button
    LEDs:
    Power status LED
    Network activity LED
    System overheat/fan fail/power fail LED
     
    Bios
    BIOS Type:
    AMI BIOS, 8Mb SPI Flash ROM
    BIOS Features:
    Plug and Play (PnP)
    DMI 2.3
    PCI 2.2
    ACPI 1.0 / 2.0 / 3.0
    USB Keyboard support
    SMBIOS 2.3
     
    Onboard Devices
    Chipset:
    Intel ICH9R Express
    Intel 82574L
    SATA:
    6x SATA (3 Gbps)
    RAID 0, 1, 5, 10 support (Windows)
    RAID 0, 1, 10 support (Linux)
    IPMI:
    Support for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
    Nuvoton WPCM450 BMC
    Network Controllers:
    High Performance Intel® 82574L Dual Port Gigabit LAN
    Virtual Machine Device Queues High efficient I/O overhead
    Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
    1x Realtek RTL8201N PHY (dedicated IPMI)
    VGA:
    Matrox G200eW 16MB DDR2
    Super I/O:
    Nuvoton W83627DHG UBE
     
    HDD Drive Bays
    24x 2.5" Hot-swap SATA drive bays total
    Enterprise SATA HDD only recommended
     
    Power Supply
    720W (1+1) Redundant high-efficiency power supply with PMBus
    AC Input:
    100-240 V, 50-60 Hz, 4-9 Amp
    DC Output:
    3 Amp @ +5V standby
    59 Amp @ +12V
    With Power Distributor:
    +5V: 30 Amp
    Certification:
    80+ Gold Certified
     
    Input Output
    (per node)
    Serial ATA:

    3x SATA ports (3Gbps) through hot-plug slot, with RAID 0, 1, 5
    1x SATA port onboard
    USB:
    6 USB 2.0 ports (2 rear + 4 via 2 headers)
    LAN:
    2x RJ45 LAN port
    IPMI:
    Integrated IPMI 2.0 with shared LAN
    DOM:
    1x DOM (Disk on Module) power connector
    Others:
    2x COM port headers ready
    TPM 20-pin header ready
     
    Cooling
    4x 80mm heavy duty fans with PWM fan speed controls
     
    Operating Environment
    RoHS:
    RoHS Compliant
    Environmental Spec.:    
    Operating Temperature: 10°to 35°C (50°to 95°F)
    Non-operating Temperature: -40°to 70°C (-40°to 158°F)
    Operating Relative Humidity: 8% to 90% (non-condensing)
    Non-operating Relative Humidity: 5 to 95% (non-condensing)
     
    Included Items
    Motherboard / Chassis:
    4x MBD-X7SPT-DF-D525+ 
    1x CSE-217HO-R720B
    Backplane:
    4x BPN-ADP-6SATA3
    Backplane:
    1x BPN-SAS-217HQ
    CD:
    1x CDR-X7-UP  
    Power Supply:
    2x PWS-721P-1R  
    Drive Tray(s):
    24x MCP-220-00047-0B
    Rails:
    1 set MCP-290-00053-0N
     
     
  • 3015MR-H10TNR
    3015MR-H10TNR
    Please Inquire
    SKU
    AS-3015MR-H8TNR 
    Processor
    (per Node)
    CPU:

    Single Socket AM5 (LGA-1718)
    AMD EPYC™ 4005/4004 Series Processor

    Core Count:
    Up to 16C/32T; Up to 128MB Cache

    Note:
    Supports 65W - 170W TDP CPUs (Air Cooled)*
    *Air Cooled CPUs with TDP over 120W only supported under specific conditions. Contact a Supermicro representative for details.

    GPU (per Node)
    Max GPU Count:

    Up to 1 single-width GPU

    Supported GPU:
    NVIDIA PCIe: L4, A2
     
    Memory
    (per Node)
    Memory:

    Slot Count: 4 DIMM slots
    Max Memory (1DPC): Up to 192GB 5600MT/s ECC/non-ECC DDR5 UDIMM
    Max Memory (2DPC): Up to 192GB 3600MT/s ECC/non-ECC DDR5 UDIMM

    Memory Voltage:
    1.1V
     
    Chassis
    3U Rackmount Chassis
     
    Dimensions
    Height:
    5.16" (131 mm)
    Width:
    17.68" (449 mm)
    Depth:
    30.51" (775 mm)
     
    Front Panel
    Buttons:
    Power On/Off
     
    Bios
    BIOS Type:
    AMI 32MB SPI Flash EEPROM
     
    Onboard Devices
    (per Node)
    NVMe:

    NVMe; (Native)

    Chipset:
    System on Chip

    Network Connectivity:
    No NIC option supported
     
    HDD Drive Bays
    (per Node)
    Drive Bays Configuration:

    Default: Total 4 bays
    2 internal fixed 2.5" PCIe 5.0 NVMe drive bays
    2 internal fixed 2.5" SATA drive bays

    M.2:
    1 M.2 NVMe slot (M-key 2280/22110)
     
    Expansion Slots
    (per Node)
    PCI-Express (PCIe) Configuration:
    Default
    1 PCIe 5.0 x16 LP slot
    1 PCIe 5.0 x4 MicroLP slot
     
    Power Supply
    4x 2000W Redundant (3 + 1) Titanium Level (96%) power supplies
    Dimension (WxHxL):

    73.5 x 40 x 203 mm

    Input:
    1000W: 100-127Vac
    1000W: 100-127Vac / 50-60Hz
    1800W: 200-220Vac
    1800W: 200-220Vac / 50-60Hz
    1980W: 220-230Vac
    1980W: 220-230Vac / 50-60Hz
    2000W: 220-240Vac
    2000W: 220-240Vac / 50-60Hz (for UL only)
    2000W: 230-240Vdc
    2000W: 230-240Vac
    2000W: 230-240Vac / 50-60Hz
    2000W: 230-240Vdc / 50-60Hz (for China only)

    +12V:
    Max: 83A / Min: 0A (100Vac-127Vac)
    Max: 150A / Min: 0A (200Vac-220Vac)
    Max: 165A / Min: 0A (220Vac-230Vac)
    Max: 166A / Min: 0A (230Vac-240Vac)

    12V SB:
    Max: 3.5A / Min: 0A
    Max: 3.5A

    Output Type:
    Backplanes (gold finger)
     
    Input Output
    (per Node)
    USB:
    2 USB 2.0 ports

    Video:
    1 port

    TPM:
    1 TPM Onboard/port 80
     
    Cooling
    Fans:
    5 Heavy Duty 8cm Fan(s)

    Air Shroud:
    10 Air Shrouds
     
    Operating Environment
    ROHS:
    RoHS Compliant
    Environmental Spec.:
    Operating Temperature: 10°C to 35°C (50°F to 95°F)
    Non-operating Temperature: -30°C to 60°C (-22°F to 140°F)
    Operating Relative Humidity: 8% to 80% (non-condensing)
    Non-operating Relative Humidity: 8% to 90% (non-condensing)
     
    Details
    Management
    Software:
    SuperCloud Composer®
    Supermicro Server Manager (SSM)
    Supermicro Update Manager (SUM)
    Supermicro SuperDoctor® 5 (SD5)
    Super Diagnostics Offline (SDO)
    Supermicro Thin-Agent Service (TAS)
    SuperServer Automation Assistant (SAA) New!
    Power configurations:
    Power-on mode for AC power recovery
    ACPI 6.0 Power Management
     
     
    Security
    Hardware:
    Trusted Platform Module (TPM) 2.0
    Silicon Root of Trust (RoT) – NIST 800-193 Compliant
    Features:
    Cryptographically Signed Firmware
    Secure Boot
    Secure Firmware Updates
    Automatic Firmware Recovery
    Supply Chain Security: Remote Attestation
    Runtime BMC Protections
    System Lockdown
     
     
    PC Health Monitoring
    Temperature:
    Monitoring for CPU and chassis environment
    CPU:
    Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
    3-Phase-switching voltage regulator with auto-sense from 0.5V-2.3V
    FAN
    Fan:
    speed control, Dual Cooling Zone
     
  • 3015MR-H8TNR
    3015MR-H8TNR
    Please Inquire
    SKU
    AS-3015MR-H8TNR 
    Processor
    (per Node)
    CPU:

    Single Socket AM5 (LGA-1718)
    AMD EPYC™ 4005/4004 Series Processor

    Core Count:
    Up to 16C/32T; Up to 128MB Cache

    Note:
    Supports 65W - 170W TDP CPUs (Air Cooled)
    Air Cooled CPUs with TDP over 120W only supported under specific conditions. Contact a our representative for details.
     
     
    GPU (per Node)
    Max GPU Count:

    Up to 1 single-width GPU

    Supported GPU:
    NVIDIA PCIe: T4, L4, A2
     
    Memory
    (per Node)
    Memory:

    Slot Count: 4 DIMM slots
    Max Memory (1DPC): Up to 192GB 5600MT/s ECC/non-ECC DDR5 UDIMM
    Max Memory (2DPC): Up to 192GB 3600MT/s ECC/non-ECC DDR5 UDIMM
     
    Memory Voltage:
    1.1V
     
    Chassis
    3U Rackmount Chassis
     
    Dimensions
    Height:
    5.21" (132 mm)
    Width:
    17.26" (438 mm)
    Depth:
    23.2" (589 mm)
     
    Front Panel
    LED:
    8 Individual Node Status Indicators
    Power Failure

    Buttons:
    Power On/Off
     
    Bios
    BIOS Type:
    AMI 32MB SPI Flash EEPROM
     
    Onboard Devices
    (per Node)
    NVMe:

    NVMe; (Native)

    Chipset:
    AMD Knoll - Integrated I/O Controller Hub

    Network Connectivity:
    No NIC option supported
     
    HDD Drive Bays
    (per Node)
    Drive Bays Configuration:

    Default: Total 2 bays
    2 front fixed 3.5"/2.5" NVMe/SAS*/SATA* drive bays
    (*SAS/SATA support may require additional storage controller and/or cables)

    M.2:
    1 M.2 NVMe/SATA slot (M-key 2280/22110)
     
    Expansion Slots
    (per Node)
    PCI-Express (PCIe) Configuration:

    Default
    1 PCIe 5.0 x8 (in x16) LP slot
    1 PCIe 5.0 x8 MicroLP slot
     
    Power Supply
    2x 2200W Redundant (1 + 1) Titanium Level (96%) power supplies
    Dimension (WxHxL):

    76 x 40 x 336 mm

    Total Output Power:
    (for CCC only)
    (for UL/cUL use only)

    Input:
    1200W: 100-127Vac
    1200W: 100-127Vac / 50-60Hz
    1800W: 200-220Vac / 50-60Hz
    2090W: 200-220Vac / 50-60Hz (for UL/cUL use only)
    1980W: 220-230Vac / 50-60Hz
    2200W: 220-240Vac / 50-60Hz (for UL/cUL use only)
    2200W: 230-240Vac
    2090W: 230-240Vac / 50-60Hz
    2090W: 230-240Vdc / 50-60Hz (for CCC only)

    +12V:
    Max: 100A / Min: 0A (100Vdc-127Vdc)
    Max: 100A / Min: 0A (100Vac-127Vac)
    Max: 150A / Min: 0A (200Vac-220Vac)
    Max: 165A / Min: 0A (220Vac-230Vac)
    Max: 183.33A / Min: 0A (220Vac-240Vac) (for UL/cUL only)
    Max: 183.3A / Min: 0A (220Vac-240Vac)
    Max: 174.17A / Min: 0A (230Vac-240Vac)
    Max: 174.17A / Min: 0A (230Vdc-240Vdc) (for CCC only)
    Max: 174.17A / Min: 0A (230Vac-240Vac) (for UL/cUL only)
    Max: 183.33A / Min: 0A (230Vdc-240Vdc)

    5V SB:
    Max: 1A / Min: 0A

    Output Type:
    Backplanes (gold finger)
     
    Input Output
    (per Node)
    USB:

    2 USB 2.0 ports
    1 Type-C port(front)
    Video:
    1 port
    TPM:
    1 TPM Onboard/port 80
     
    Cooling
    Fans:
    4 Heavy Duty 8cm Fan(s)

    Air Shroud:
    8 Air Shrouds
     
    Operating Environment
    ROHS:
    RoHS Compliant
    Environmental Spec.:
    Operating Temperature: 10°C to 35°C (50°F to 95°F)
    Non-operating Temperature: -30°C to 60°C (-22°F to 140°F)
    Operating Relative Humidity: 8% to 80% (non-condensing)
    Non-operating Relative Humidity: 8% to 90% (non-condensing)
     
    Details
    Management
    Software:
    SuperCloud Composer®
    Supermicro Server Manager (SSM)
    Supermicro Update Manager (SUM)
    Supermicro SuperDoctor® 5 (SD5)
    Super Diagnostics Offline (SDO)
    Supermicro Thin-Agent Service (TAS)
    SuperServer Automation Assistant (SAA) New!
    Power configurations:
    Power-on mode for AC power recovery
    ACPI 6.0 Power Management

    PC Health Monitoring
    Temperature:
    Monitoring for CPU and chassis environment
    CPU:
    Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
    3-Phase-switching voltage regulator with auto-sense from 0.5V-2.3V
    FAN:
    Fan speed control, Dual Cooling Zone
     
  • AS-2115GT-HNTF
    AS-2115GT-HNTF
    Please Inquire
    SKU
    AS-2115GT-HNTF 
    Processor
    (per Node)
    CPU:
    Single Socket SP5
    AMD EPYC™ 9004 Series Processor
    Support CPU TDP up to 360W
    Note:
    Certain CPUs with high TDP may be supported only under specific conditions. Please contact Supermicro Technical Support for additional information about specialized system optimization
     
    Memory
    (per Node)
    Memory:
    Memory Capacity: 12 DIMM slots
    Up to 3TB: 12x 256 GB DRAM
    Memory Type: 4800MHz ECC DDR5 RDIMM
     
    Chassis
    2U Rackmount Chassis
     
    Dimensions
    Height:
    3.46" (88mm)
    Width:
    17.67" (449mm)
    Depth:
    28" (711.2mm)
     
    Front Panel
    Buttons:
    Power On/Off button
    UID button
    LEDs:
    HDD activity LED
    Network activity LEDs
    Power status LED
    Universal Information (UID) LED
     
    Bios
    BIOS Type:
    AMI 32MB Flash ROM
     
    Onboard Devices
    (per Node)
    Chipset:
    AMD SP5
    Network Connectivity:
    Via IO Module
    IPMI:
    Support for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
     
    HDD Drive Bays
    Hot-swap:
    4x 2.5" hot-swap NVMe/SATA drive bays (4x 2.5" NVMe hybrid)
    M.2:
    2 M.2 NVMe OR 2 M.2 SATA3
     
    Expansion Slots
    (per Node)
    PCI-Express (PCIe):
    1 PCIe 5.0 x16 LP slot(s)
     
    Power Supply
    Redundant 2200w Titanium Level(96%)High-Efficiency Power Supplies with I2C & PMBus
    Dimension (W x H x L):
    106 x 84 x 245 mm
    AC Input:
    100-127Vdc (1200W for the Rest of the World)
    200-220Vdc (1800W for the Rest of the World)
    200-220Vdc (2090W for North America - UL & cUL)
    220-230Vdc (1980W for the Rest of the World)
    220-240Vdc (2200W for North America - UL & cUL)
    230-240Vdc (2090W for the Rest of the World)
    Certification:
    Titanium Level
     
    Input Output
    (per Node)
    LAN:
    1 RJ45 Dedicated BMC LAN port
    USB:
    2 USB 3.0 port(s) (2 USB)
    Video:
    1 VGA port(s)
     
    Cooling
    Air Shroud:
    1 per node Air Shroud(s)
    Fans:
    2x 17.6K RPM Heavy Duty 8cm Fan(s)
     
    Operating Environment
    RoHS:
    RoHS Compliant
    Environmental Spec.:
    Operating Temperature:
       10°C ~ 35°C (50°F ~ 95°F)
    Non-operating Temperature:
       -30°C to 60°C (-22°F to 140°F)
    Operating Relative Humidity:
       8% to 80% (non-condensing)
    Non-operating Relative Humidity:
       8% to 90% (non-condensing)
     
  • AS-2115GT-HNTR
    AS-2115GT-HNTR
    Please Inquire
    SKU
    AS-2115GT-HNTR 
    Processor
    (per Node)
    CPU:
    Single Socket SP5
    AMD EPYC™ 9004 Series Processor
    Support CPU TDP up to 290W 
    Note:
    Certain CPUs with high TDP may be supported only under specific conditions. Please contact our Technical Support for additional information about specialized system optimization
     
    Memory
    (per Node)
    Memory:
    Memory Capacity: 12 DIMM slots
    Up to 3TB: 12x 256 GB DRAM
    Memory Type: 4800MHz ECC DDR5 RDIMM
     
    Chassis
    2U Rackmount Chassis
     
    Dimensions
    Height:
    3.46" (88mm)
    Width:
    17.67" (449mm)
    Depth:
    28" (711.2mm)
     
    Front Panel
    Buttons:
    Power On/Off button
    UID button
    LEDs:
    HDD activity LED
    Network activity LEDs
    Power status LED
    Universal Information (UID) LED
     
    Bios
    BIOS Type:
    AMI 32MB Flash ROM
     
    Onboard Devices
    (per Node)
    Chipset:
    AMD SP5
    Network Connectivity:
    Via IO Module
    IPMI:
    Support for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
     
    HDD Drive Bays
    (per Node)
    Hot-swap:
    6x 2.5" hot-swap NVMe/SATA drive bays (6x 2.5" NVMe hybrid)
    M.2:
    2 M.2 NVMe OR 2 M.2 SATA3
     
    Power Supply
    Redundant 2200w Titanium Level(96%)High-Efficiency Power Supplies with I2C & PMBus
    Dimension (W x H x L):
    106 x 84 x 245 mm
    AC Input:
    100-127Vdc (1200W for the Rest of the World)
    200-220Vdc (1800W for the Rest of the World)
    200-220Vdc (2090W for North America - UL & cUL)
    220-230Vdc (1980W for the Rest of the World)
    220-240Vdc (2200W for North America - UL & cUL)
    230-240Vdc (2090W for the Rest of the World)
    Certification:
    Titanium Level
     
    Input Output
    (per Node)
    LAN:
    1 RJ45 Dedicated BMC LAN port
    USB:
    2 USB 3.0 port(s) (2 USB)
    Video:
    1 VGA port(s)
     
    Cooling
    Air Shroud:
    1 per node Air Shroud(s)
    Fans:
    2x 17.6K RPM Heavy Duty 8cm Fan(s)
     
    Operating Environment
    RoHS:
    RoHS Compliant
    Environmental Spec.:
    Operating Temperature:
       10°C ~ 35°C (50°F ~ 95°F)
    Non-operating Temperature:
       -30°C to 60°C (-22°F to 140°F)
    Operating Relative Humidity:
       8% to 80% (non-condensing)
    Non-operating Relative Humidity:
       8% to 90% (non-condensing)
     
  • AS-4125GS-TNRT
    AS-4125GS-TNRT
    $9,293.00
    SKU
    AS-4125GS-TNRT 
    Processor
    CPU:
    Dual Socket SP5
    AMD EPYC™ 9004 Series Processors
    Support CPU TDP up to 360W
    Cores:
    Up to 96C/192T
     
    Memory
    Memory:
    Memory Capacity: 24 DIMM slots
    Up to 6TB: 24x 256 GB DRAM
    Memory Type: 4800MHz ECC DDR5 RDIMM/LRDIMM
    Note:
    Full memory population recommended for optimal performance. 
    Memory Voltage:
    1.2 V
    Error Detection:
    ECC
     
    Chassis
    4U Rackmount Chassis
     
    Dimensions
    Height:
    7" (178mm)
    Width:
    17.2" (437mm)
    Depth:
    29" (737mm)
     
    Bios
    BIOS Type:
    AMI 32MB SPI Flash EEPROM
     
    Onboard Devices
    SATA:
    SATA3 (6Gbps)
    Chipset:
    AMD SP5
    Network Connectivity:
    2x 10GbE BaseT
    IPMI:
    Support for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
     
    HDD Drive Bays
    Hot-swap:
    24x 2.5" hot-swap NVMe/SATA/SAS drive bays (4x 2.5" NVMe dedicated)
    M.2:
    1 M.2 NVMe OR 1 M.2 SATA3
     
    Expansion Slots
    PCI-Express (PCIe):
    9 PCIe 5.0 x16 FHFL slot(s)
     
    Power Supply
    2000W 1U redundant power supply W73.5 x L203 x H40mm
    Dimension (W x H x L):
    73.5 x 40 x 203 mm
    AC Input:
    1000W: 100-127Vac / 50-60Hz
    1800W: 200-220Vac / 50-60Hz
    1980W: 220-230Vac / 50-60Hz
    2000W: 220-240Vac / 50-60Hz
    2000W: 230-240Vac / 50-60Hz
    2000W: 230-240Vdc
    +12V:
    Max: 83A / Min: 0A (100Vac-127Vac)
    Max: 150A / Min: 0A (200Vac-220Vac)
    Max: 165A / Min: 0A (220Vac-230Vac)
    Max: 166A / Min: 0A (230Vac-240Vac)
    12V SB:
    Max: 3.5A / Min: 0A
    Output Type:
    Backplanes (gold finger)
    Certification:
    Titanium Level
     
    Input Output
    Video:
    1 VGA port(s)
     
    Cooling
    8 heavy duty fans with optimal fan speed control
     
    Operating Environment
    Environmental Spec.:
    Operating Temperature:
       10°C ~ 35°C (50°F ~ 95°F)
    Non-operating Temperature:
       -40°C to 60°C (-40°F to 140°F)
    Operating Relative Humidity:
       8% to 90% (non-condensing)
    Non-operating Relative Humidity:
       5% to 95% (non-condensing)
     
  • H231-G20
    H231-G20
    $4,575.00
    SKU
    H231-G20 
    Processor
    Intel® Xeon® Processor Scalable Family
    Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon® Silver Processor and Intel® Xeon® Bronze Processor
    CPU TDP up to 165W
    NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable
     
    Socket Per Node:
    2x LGA 3647
    Total:
    4 x LGA 3647
    Socket P0
    Mounting pitch: Narrow ILM
     
    Memory
    Per node:
    16x DIMM slots
    Total:
    32x DIMM slots
    DDR4 memory supported only
    6-channel memory architecture
    RDIMM modules up to 32GB supported
    LRDIMM modules up to 64GB supported
    1.2V modules: 2666/2400/2133 MHz
     
    Chassis
    2U Rackmount Server
     
    Dimensions
    440mm x 87mm x 820mm
     
    Onboard Devices
    LAN:
    Per node:

    2x 10Gb/s BASE-T LAN ports (Intel® X550-AT2)
    1x Dedicated management port
    Total:
    4x 10Gb/s BASE-T LAN ports (Intel® X550-AT2)
    2x Dedicated management ports
    1x 10/100/1000 *CMC global management port
    CMC: Chassis Management Controller, to monitor all status of computing nodes.
     
    Video:
    Integrated in Aspeed® AST2500
    2D Video Graphic Adapter with PCIe bus interface
    1920x1200@60Hz 32bpp, DDR4 SDRAM
     
    HDD Drive Bays
    Per node:
    10x 2.5" SAS/SATA hot-swappable HDD/SSD bays
    2x 2.5" U.2 hot-swappable HDD/SSD bays
    Total:
    24x 2.5" SAS/SATA hot-swappable HDD/SSD bays
    - 20x 2.5" SAS/SATA hot-swappable HDD/SSD bays
    - 4x 2.5" U.2 hot-swappable HDD/SSD bays
    SAS card is required to enable the drive bays
     
    RAID:
    For SATA drives:
    Intel® SATA RAID 0/1/5/10
    For U.2 drives:
    Intel® Virtual RAID On CPU (VROC) RAID 0, 1, 5
    Note: VROC module is for Intel®SSD only
     
    Expansion Slots
    Per node:
    1x PCIe x16 slot (Gen3 x16 bus) for GPU
    1x Half-length low-profile slot with PCIe x16 (Gen3 x16 bus)
    1x Half-length low-profile slot with PCIe x8 (Gen3 x8 bus)
    1x OCP mezzanine slot with PCIe Gen3 x16 bus
    Total:
    2x PCIe x16 slots (Gen3 x16 bus) for GPUs
    2x Half-length low-profile slot with PCIe x16 (Gen3 x16 bus)
    2x Half-length low-profile slot with PCIe x8 (Gen3 x8 bus)
    2x OCP mezzanine slot with PCIe Gen3 x16 bus
    - For the latest GPU QVL, please contact your GIGABYTE representative
     
    Power Supply
    2x 2200W redundant PSUs
    80 PLUS Platinum
    AC Input:
    100-127V~/ 14A, 47-63Hz
    200-240V~/ 12.6A, 47-63Hz
    DC Output:
    Max 1200W/ 100-127V~
    +12.12V/ 95.6A
    +12Vsb/ 3.5A
    Max 2200W/ 200-240V
    +12.12V/ 178.1A
    +12Vsb/ 3.5A
     
    Input Output
    Internal I/O
    Per node:
    1x COM header
    1x TPM header
    1x BMC SGPIO header
    1x JTAG BMC header
    1x PLD header
    1x Clear CMOS jumper
    1x IPMB connector
    1x Buzzer
     
    Front I/O
    Per node:
    1x Power button with LED
    1x ID button with LED
    1x Status LED
     
    Total:
    2 x Power button with LED
    2 x ID button with LED
    2 x Status LED
    *1 x CMC status LED
    *Only one CMC status LED per system
     
    Rear I/O
    Per node:
    2x USB 3.0
    1 x VGA
    2x RJ45
    1x RJ45 MLAN
    1x ID LED
     
    Total:
    4 x USB 3.0
    2 x VGA
    4 x RJ45
    2 x RJ45 MLAN
    2 x ID LEDs
    *1 x CMC global management port
    *Only one CMC global management port per system
    Backplane I/O:
    24 x ports
    12Gb/s & 6Gb/s compatible
    PCIe Gen3 x4 U.2 port
     
    Operating Environment
    Operating temperature: 10°C to 35°C
    Operating humidity: 8-80% (non-condensing)
    Non-operating temperature: -40°C to 60°C
    Non-operating humidity: 20%-95% (non-condensing)
     
    Details
    System Management:
    Aspeed® AST2500 management controller
    Avocent® MergePoint IPMI 2.0 web interface:
    Network settings
    Network security settings
    Hardware information
    Users control
    Services settings
    IPMI settings
    Sessions control
    LDAP settings
    Power control
    Fan profiles
    Voltages, fans and temperatures monitoring
    System event log
    Events management (platform events, trap settings, email settings)
    Serial Over LAN
    vKVM & vMedia (HTML5)
     
  • H261-N80
    H261-N80
    $6,169.00
    SKU
    H261-N80 
    Processor
    (per node)
    2nd Generation Intel® Xeon® Scalable and Intel® Xeon® Scalable Processors
    Intel® Xeon® Platinum Processor, Intel® Xeon® Gold Processor, Intel® Xeon® Silver Processor and Intel® Xeon® Bronze Processor
    CPU TDP up to 165W
    NOTE: If only 1 CPU is installed, some PCIe or memory functions might be unavailable
     
     
    Memory
    (per node)
    16 x DIMM slots
    Total:
    64 x DIMM slots
    DDR4 memory supported only
    6-channel memory architecture
    RDIMM modules up to 64GB supported
    LRDIMM modules up to 128GB supported
    Supports Intel® Optane™ DC Persistent Memory (DCPMM)
    1.2V modules: 2933( 1DPC)/2666/2400/2133 MHz
    Maximum verified DCPMM configuration:
    * Ambient temperature 35°C
    * 2nd Generation Intel® Xeon® Scalable processor 165W (Max.)
    * DCPMM 256GB x2 pcs (Per Node)
    DCPMM installation locations:
    DIMM_P1_( G1, J1)
    NOTE: 
    1. 2933MHz for 2nd Generation Intel® Xeon® Scalable Processors only
    2. Intel® Optane™ DC Persistent Memory for 2nd Generation Intel® Xeon® Scalable Processors only
    3. The maximum number of DCPMM that can be installed is based on a maximum operating (ambient) temperature of 35°C
    4. To enquire about installing a greater number of DCPMM, please consult with our technical or sales representative
     
     
    Chassis
    2U Rackmount Chassis
     
    Dimensions
    440mm(W) x 87mm(H) x 820mm(D)
     
    Onboard Devices
    LAN:
    Per node:
    2x 10Gb/s BASE-T LAN ports (Intel® X550-AT2)
    1x Dedicated management port
    Total:
    8x 10Gb/s BASE-T LAN ports (Intel® X550-AT2)
    4x Dedicated management ports
    1x 10/100/1000 *CMC global management port
    CMC: Chassis Management Controller, to monitor all status of computing nodes.
    Video:
    Integrated in Aspeed® AST2500
    2D Video Graphic Adapter with PCIe bus interface
    1920x1200@60Hz 32bpp, DDR4 SDRAM
     
    Optical Drive
    Per node:
    4x 2.5" SAS/SATA hot-swappable HDD/SSD bays
    2x 2.5" U.2 hot-swappable HDD/SSD bays
    Total:
    24x 2.5" hot-swappable HDD/SSD bays
    16x 2.5" SAS/SATA hot-swappable HDD/SSD bays
    8x 2.5" U.2 hot-swappable HDD/SSD bays
    SAS card is required for SAS devices support
    RAID:
    For SATA drives:
    Intel® SATA RAID 0/1/5/10
    For U.2 drives:
    Intel® Virtual RAID On CPU (VROC) RAID 0, 1, 5
    Note: VROC module is for Intel®SSD only
     
    Expansion Slots
    Per node:
    1x Half-length low-profile slot with PCIe x16 (Gen3 x16 bus)
    1x Half-length low-profile slot with PCIe x8 (Gen3 x8 bus)
    1x OCP mezzanine slot with PCIe Gen3 x16 bus
    Total:
    4x Half-length low-profile slot with PCIe x16 (Gen3 x16 bus)
    4x Half-length low-profile slot with PCIe x8 (Gen3 x8 bus)
    4x OCP mezzanine slot with PCIe Gen3 x16 bus
     
    Power Supply
    2x 2200W redundant PSUs
    80 PLUS Platinum
    AC Input:
    100-127V~/ 14A, 47-63Hz
    200-240V~/ 12.6A, 47-63Hz
    DC Output:
    Max 1200W/ 100-127V~
    +12.12V/ 95.6A
    +12Vsb/ 3.5A
    Max 2200W/ 200-240V
    +12.12V/ 178.1A
    +12Vsb/ 3.5A
     
    Input Output
    Internal I/O:
    (Per node)
    1x COM header
    1x TPM header
    1x BMC SGPIO header
    1x JTAG BMC header
    1x PLD header
    1x Clear CMOS jumper
    1x IPMB connector
    1x Buzzer
    Front I/O:
    (Per node)
    1x Power button with LED
    1x ID button with LED
    1x Status LED
    (Total)
    4x Power button with LED
    4x ID button with LED
    4x Status LED
    1x CMC status LED
    Only one CMC status LED per system
    Rear I/O:
    (Per node)
    2x USB 3.0
    1x VGA
    2x RJ45
    1x RJ45 MLAN
    1x ID LED
    (Total)
    8x USB 3.0
    4x VGA
    8x RJ45
    4x RJ45 MLAN
    4x ID LEDs
    1x CMC global management port
    Only one CMC global management port per system
    Backplane I/O:
    24x ports
    12Gb/s & 6Gb/s compatible
    PCIe Gen3 x4 U.2 port
     
    Cooling
    8x 80x80x38mm (16,300rpm) fans
     
    Operating Environment
    Operating temperature: 10°C to 35°C
    Operating humidity: 8%-80% (non-condensing)
    Non-operating temperature: -40°C to 60°C
    Non-operating humidity: 20%-95% (non-condensing)
     
     
    Details
    TPM:
    1x TPM header with LPC interface
    Optional TPM2.0 kit: CTM000
    System Management:
    Aspeed® AST2500 management controller
    Avocent® MergePoint IPMI 2.0 web interface:
    Network settings
    Network security settings
    Hardware information
    Users control
    Services settings
    IPMI settings
    Sessions control
    LDAP settings
    Power control
    Fan profiles
    Voltages, fans and temperatures monitoring
    System event log
    Events management (platform events, trap settings, email settings)
    Serial Over LAN
    vKVM & vMedia (HTML5)
     
  • HG68B8016
    HG68B8016
    Please Inquire
    SKU
    B8016H68D5 
    Processor
    (per node)
    Q'ty / Socket Type:
    (1) AMD Socket AM5

    Supported CPU Series:
    (1) AMD Ryzen 7000 Series Processor / (1) AMD EPYC™ 4005/4004 Series Processor

    Configurable Thermal Design Power Wattage:
    Max up to 105W (TDP)
     
    Memory
    (per node)
    Supported DIMM Qty:
    (4) DIMM slots

    DIMM Type / Speed:
    DDR5 ECC UDIMM & non-ECC 5600

    Capacity:
    Up to 192GB UDIMM

    Memory channel:
    2 Channels per CPU

    Memory voltage:
    1.1V
     
    Chassis
    6U Rackmount Chassis
     
    Dimensions
    Dimension (D x W x H):
    26.85" x 17.60" x 10.44"
    682mm x 447mm x 265.3mm
     
    Front Panel
    Buttons:
    (1) PWR w/ LED / (1) RST

    LEDs:
    (1) PWR / (1) HDD / (1) Warning

    I/O Ports:
    (4) USB 3.2 Gen.1 ports / (1) VGA port / (2) Display ports / (1) Line in / Line out / MIC / (3) RJ-45
     
    Bios
    (per node)
    Brand / ROM size:
    AMI / 32MB

    Feature:
    Console Redirection / ACPI S0, S5. S3
     
    Onboard Devices
    LAN (per node)
    Q'ty / Port:
    (2) GbE ports
    Controller:
    Intel I210
    PHY:
    Realtek RTL8211F
     
     
    Storage NVMe (per node)
    Connector:
    (M.2) (2) 2280 (by PCIe.4 interface)
     
     
    Graphic (per node)
    Connector type:
    D-Sub 15-pin
    Resolution:
    Up to 1920x1200
    Chipset:
    Aspeed AST2600
     
    Expansion Slots
    (per node)
    PCIe:
    (1) PCIe Gen.4 x4 slot / (1) PCIe Gen.4 x8 slot ( w/ x4 link) / (1) PCIe Gen.5 x16 slot
     
    Power Supply
    (per node)
    Type:
    CRPS
    Input Range:
    AC 100-127V/10A / AC 200-240V/5A
    Frequency:
    50-60 Hz
    Output Watts:
    800 Watts
    Efficiency:
    80 plus Titanium
    Redundancy:
    1+1
     
    Input Output
    (per node)
    USB:
    (4) USB3.2 Gen.1 ports

    VGA:
    (2) Display ports / (1) D-Sub 15-pin port

    Audio:
    (1) Line in / Line out / MIC

    RJ-45:
    (2) GbE ports

    Button:
    ID Button / Power Button / Reset Button
     
    Cooling
    (2) easy-swap 8038 fans are pre-installed / per node
     
    Operating Environment
    Operating Temp.:
    10° C ~ 35° C (50° F~ 95° F)
    Non-operating Temp.:
    - 40° C ~ 70° C (-40° F ~ 158° F)
    In/Non-operating Humidity:
    90%, non-condensing at 35° C
     
    Details
    TPM (Optional)
    TPM Support:
    Please refer to our TPM supported list.
    Interface:
    SPI

    System Monitoring
    Chipset:
    Aspeed AST2600
    Temperature:
    Monitors temperature for CPU & memory & system environment
    Voltage:
    Monitors voltage for CPU, memory, chipset & power supply
    LED:
    Over temperature warning indicator / Fan & PSU fail LED indicator

    Server Management
    Onboard Chipset:
    Onboard Aspeed AST2600
    AST2600 iKVM Feature:
    24-bit high quality video compression / Supports storage over IP and remote platform-flash / USB 2.0 virtual hub
    AST2600 IPMI Feature:
    IPMI 2.0 compliant baseboard management controller (BMC) / 10/100/1000 Mb/s MAC interface
     
  • HP201-AG
    HP201-AG
    $6,083.00
    SKU
    XP1-P201AG01 
    Processor
    (per node)
    Single AMD EPYC™ 7003/7002/7001 processor
    Supports CPU TDP up to 280W (Support by EPYC™ 7003 CPU)
    Socket Type: SP3
     
    Memory
    (per node)
    DDR4 3200/2933MHz RDIMM/LRDIMM
    Total 8 memory slots; 8 channels
    Supports up to 2TB (support by EPYC™ 7003/7002 CPU)
    Supports NVDIMM feature
     
    Chassis
    2U Rackmount Chassis
     
    Dimensions
    438mm x780mm x87.5mm
    17.2" x30.7" x3.5"
     
    Front Panel
    Node power on/off
     
    Bios
    BIOS Type: Insyde UEFI BIOS
    BIOS Features:
    ACPI
    PXE
    IPMI KCS interface
    SMBIOS
    SRIOV
    iSCSI
    TPM
    PCIe Hotplug
     
    Onboard Devices
    SATA/NVMe:
    2x SATA 6.0 Gb/s
    2x SATA 6.0 Gb/s by M.2 (M-key)
    supports up to 22110 (can be confirgured as 2 x PCIe x1 M.2)
    BMC:
    Aspeed AST2500 Advanced PCIe Graphics & Remote Management Processor
    Baseboard Management Controller
    Intelligent Platform Interface 2.0 (IPMI 2.0)
    iKVM, Media Redirection, IPMI over LAN, Serial over LAN
    HTML5
    Redfish
    SMASH Support
    Graphics :
    Aspeed AST2500 Advanced PCIe Graphics & Remote Management Processor
    PCIe VGA/2D Controller
    1920x1200@60Hz 32bpp
     
    HDD Drive Bays
    External:
    24x 2.5" hot swap (6 x NVMe/SAS/SATA per node)
    Internal:
    8x 2.5" hot swap(2 x SATA per node) (Option)
    2x M.2(NGFF) / M-Key / 2280 / Supports SATA or PCIe x2
    Backplane:
    1x 24-port NVMe/SAS/SATA backplane with high-density connectors to bridge riser board
     
    Expansion Slots
    2 x16 slots (LP)
    1 x16 OCP Mezzanine V2.0
    OCP & PCIe slots rear I/O plate are BTO reserved by factory option.
     
    Power Supply
    2000W 1+1 redundant power supply 80+ Platinum (BTO)
    AC INPUT: 
    200~240V,50/60Hz,15A
    Socket type: C20 (Power cord type: C19)
     
    Input Output
    Rear I/O
    LAN:
    1x RJ45 dedicated to BMC management
    USB:
    2x USB 3.0
    VGA:
    1x external DB-15 VGA port
    Others:
    Power on/off
    System ID
    BMC alert LED
     
    Cooling
    4x 60x56mm easy swap fans
    1x 60x38mm easy swap fan
     
    Operating Environment
    Storage temperature : -10ºC(14ºF) ~ 60ºC(140ºF)
    Operating temperature : 0ºC(32ºF) ~ 35ºC(95ºF)
    Storage operating humidity : 5%~95% non-condensing
     
  • SB402-TU
    SB402-TU
    Please Inquire
    SKU
    SB402-TU 
    Processor
    Processor Support:
    3rd Gen Intel® Xeon® Scalable Processors (Ice Lake)
    Please contact Technical Support for more info/details about optimized CPUs and specialized system.

    CPU Interconnection:
    Supports CPU TDP up to 195W

    Socket Type:
    Socket P+ (LGA-4189)
     
    Memory
    8 x memory channels per CPU(1DPC)
    16 x DIMM slots support:
    DDR4 3200/2933MHz RDIMM/LRDIMM
    up to 512GB RDIMM SRx4 (16Gb)
    up to 1024GB RDIMM DRx4 (16Gb)
    up to 4096GB RDIMM 3DS 8Rx4 (16Gb)
    up to 2048GB LRDIMM QRx4 (16Gb)
    up to 4096GB LRDIMM 3DS 8Rx4 (16Gb)
    Intel® OptaneTM DC Persistent Memory (Barlow Pass) support
     
    Chassis
    4U Rackmount Chassis
     
    Dimensions
    (W x D x H)
    mm: 430 x 680 x 174.3
    inches: 16.9 x 26.8 x 6.9
     
    Front Panel
    System power on/off, System reset, System ID and 2 x USB 3.0 ports

    LEDs
    Power status, System alert, LAN activity, Drive activity, System ID
     
    Bios
    BIOS Type:
    AMI UEFI BIOS
    SPI (Serial Peripheral Interface) FLASH Interface

    BIOS Features:
    ACPI
    PXE
    WOL
    AC loss recovery
    IPMI 2.0 KCS interface
    SMBIOS
    SRIOV
    Serial console redirection
    BIOS boot specification
    BIOS recovery mode
    iSCSI
    TPM
    PCIe NTB
     
    Onboard Devices
    SATA:
    Intel® C621A PCH on-chip solution
    8 x SATA 6.0 Gb/s (by 2 x mini-SAS)
    2 x SATA 6.0 Gb/s (by 2 x SATA 7 pin)
    Optional SAS 3008/3108 modules (on OCP)

    IPMI:
    Aspeed AST2500 Advanced PCIe Graphics & Remote Management Processor
    Baseboard Management Controller
    Intelligent Platform Interface 2.0 (IPMI 2.0)
    iKVM, Media Redirection, IPMI over LAN, Serial over LAN
    SMASH Support

    Network Controllers:
    Realtek RTL8211E GbE for BMC dedicated management port
    Intel I210 GbE for BMC shared NIC management port by onboard connector
    (NCSI shared NIC - reserved for OCP V3.0)

    Graphics:
    Aspeed AST2500 Advanced PCIe Graphics & Remote Management Processor
    PCIe VGA/2D Controller
    1920x1200@60Hz 32bpp
     
    HDD Drive Bays
    External:
    3.5" hot swap: 24 (SAS/SATA, front) + 12 (SAS/SATA/NVMe, rear)
    2.5" hot swap: 2 (SATA, rear)

    Internal:
    2 x M.2(NGFF)/M-Key/2280
     
    Expansion Slots
    3 x PCIe X16 slots HHHL(LP) + 1 x OCP 3.0
    2 x PCIe X8 slots HHHL(LP)
     
    Power Supply
    1200W 1+1 CRPS RPSU 80+ Platinum
     
    Input Output
    Rear I/O
    LAN: 

    1 x GbE RJ45
    1 x GbE RJ45 dedicated to BMC management

    USB: 
    2 x USB 3.0 double-stack Type A connectors

    Video Output: 
    1 x external DB-15 VGA port

    Serial Port:
    1 x external COM port phone jack
     
    Cooling
    6 x 80x38mm hot- swap fans
     
    Operating Environment
    Storage temperature: -10°C(14°F) ~ 60°C(140°F)
    Operating temperature: 0°C(32°F) ~ 35°C(95°F)
    Storage operating humidity: 5%~95% non-condensing
     
  • SB407-TU
    SB407-TU
    Please Inquire
    SKU
    SB407-TU 
    Processor
    Processor Support:
    Dual Intel® 3rd Gen Xeon® Scalable Processors (Ice Lake)
    Please contact Technical Support for more info/details about optimized CPUs and specialized system.
    CPU Interconnection: 11.2 GT/s

    Socket Type:
    Socket P+ (LGA-4189)
     
    Memory
    8 x memory channels per CPU (1DPC)

    16 x DIMM slots support:
    DDR4 3200/2933MHz RDIMM/LRDIMM
    up to 512GB RDIMM SRx4 (16Gb)
    up to 1024GB RDIMM DRx4 (16Gb)
    up to 4096GB RDIMM 3DS 8Rx4 (16Gb)
    up to 2048GB LRDIMM QRx4 (16Gb)
    up to 4096GB LRDIMM 3DS 8Rx4 (16Gb)

    Intel® Optane™ DC Persistent Memory (Barlow Pass) support
     
    Chassis
    4U Rackmount Chassis
     
    Dimensions
    (W x D x H)
    mm: 434 x 853 x 176
    inches: 17.1 x 33.6 x 7
     
    Front Panel
    System power on/off, System reset, 2 x USB 3.0 Type A
     
    Bios
    BIOS Type:
    AMI UEFI BIOS

    BIOS Features:
    ACPI
    PXE
    WOL
    AC loss recovery
    IPMI 2.0 KCS interface
    SMBIOS
    Serial console redirection
    BIOS Boot Specification
    BIOS Recovery Mode
    SRIOV
    iSCSI
    TPM
    PCIe Hotplug
     
    Onboard Devices
    SATA:
    Intel® Lewisburg-R on-chip solution
    8 x SATA 6.0 Gb/s (by 1 x Slimine 8i)
    2 x SATA 6.0 Gb/s (by 2 x SATA 7 pin)
    RAID 0, 1, 5, 10 support by Intel RSTe

    IPMI:
    Aspeed AST2500 Advanced PCIe Graphics & Remote Management Processor
    Baseboard Management Controller
    Intelligent Platform Interface 2.0 (IPMI 2.0)
    iKVM, Media Redirection, IPMI over LAN, Serial over LAN
    SMASH Support
    HTML5
    Redfish

    Network Controllers:
    Realtek RTL8211E 10/100/1000 Mbps Ethernet for BMC dedicated management port
    Reserve NC-SI to OCP bay for optional shared-NIC module

    Graphics :
    Aspeed AST2500 Advanced PCIe Graphics & Remote Management Processor
    PCIe VGA/2D Controller
    1920x1200
    60Hz 32bpp
     
    HDD Drive Bays
    Top-load:
    60 x 3.5" hot swap (SATA/SAS)

    Rear:
    8 x 2.5” hot swap (NVMe)
      (optional: 2 x SATA)

    Internal:
    2 x M.2(NGFF)/M-Key/2280
     
    Expansion Slots
    3x PCIe X16 slots (FHHL)
    2x PCIe X8 slots (FHHL)
    1x PCIe X16 OCP (hot-swappable)
     
    Power Supply
    800W 2+2 redundant PSU PMBus 1.2 80+ Platinum
     
    Input Output
    Rear I/O
    LAN: 

    1 x GbE RJ45
    1 x GbE RJ45 dedicated BMC management

    USB: 
    2 x USB3.0 double-staked Type A connector

    Video Output: 
    1 x external VGA port (in slot#1)
    Serial Port:
    1 x external COM port phone jack
     
    Cooling
    Middle:
    4 x 80x38mm hot swap fans
     
    Operating Environment
    Storage temperature : -10ºC(14ºF) ~ 60ºC(140ºF)
    Operating temperature : 0ºC(32ºF) ~ 35ºC(95ºF)
    Storage operating humidity : 5%~95% non-condensing
     
    Details
    LEDs
    Power status, System alert, LAN activity, Drive activity, System ID

    System Management
    Baseboard Management Controller
    Intelligent Platform Interface 2.0 (IPMI 2.0)
    iKVM, Media Redirection, IPMI over LAN, Serial over LAN
    SMASH Support
    HTML5
    Redfish
     
  • SB407-VA
    SB407-VA
    Please Inquire
    SKU
    SB407-VA 
    Processor
    Processor Support:
    Dual 5th Gen Intel® Xeon® Scalable Processors (Emerald Rapids CPU)
    Dual 4th Gen Intel® Xeon® Scalable Processors (Sapphire Rapids CPU)
    Please contact Technical Support for more info/details about optimized CPUs and specialized system.

    CPU Interconnection:
    16/20GTs

    Socket Type:
    Socket E1 (LGA-4677-X)
     
    Memory
    DDR5 5600/4800MHz RDIMM (1DPC)
    Total 16 memory slots; 8 slots per CPU (1DPC)
    Supports up to 4TB (3DS RDIMM)
     
    Chassis
    4U Rackmount Chassis
     
    Dimensions
    (W x D x H)
    mm: 434 x 853 x 176
    inches: 17.1 x 33.6 x 7
     
    Front Panel
    Front Panel
    System power on/off, System reset, 2 x USB 3.0 Type-A

    LEDs
    Power status, System alert, LAN activity, Drive activity, System ID
     
    Bios
    BIOS Type:
    AMI UEFI BIOS

    BIOS Features:
    ACPI
    PXE
    WOL
    AC loss recovery
    IPMI 2.0 KCS mode interface
    SRIOV
    SMBIOS
    TPM
    Serial console redirection
    PCIe hotplug
     
    Onboard Devices
    SATA:
    Emmitsburg PCH on-chip solution
    2 x SATA3.0 (6 Gb/s) 7-pin connectors
    1 x Slimline connector (up to 8 SATA ports)

    IPMI:
    Aspeed AST2600 Advanced PCIe Graphics &
    Remote Management Processor
    Baseboard Management Controller
    Intelligent Platform Interface 2.0 (IPMI 2.0)
    iKVM, Media Redirection, IPMI over LAN,
    Serial over LAN
    HTML5
    Redfish

    Network Controllers:
    Realtek RTL8211FS 1GbE for BMC dedicated management port
    Broadcom BCM5720 dual port 1GbE (NCSI for share NIC)

    Graphics:
    Integrated VGA support by ASPEED AST2600
    Resolution up to 1920x1200 @60Hz 32bpp
     
    HDD Drive Bays
    External:
    60x 3.5” hot swap (SATA/SAS)
    8x 2.5” hot swap (6 NMVe Gen4 + 2 SATA )
    Internal:
    2x M.2/M-Key/2280 (PCIe Gen4)
     
    Backplane
    Top-load:

    2 x 30-port 12G SAS BP with 40-PHY expander
    Rear:
    8-bay Gen5 Tri-mode config as 6 NVMe + 2 SATA
     
    Expansion Slots
    4x PCIe x16 slots (FHHL)
    1x PCIe x8 slot (FHHL)
     
    Power Supply
    800W 2+2 redundant power supply PMBus 1.2 80+ Platinum/Titanium
     
    Input Output
    Rear I/O
    LAN:

    1 x RJ45 GbE connector for BMC dedicate management port
    2 x RJ45 1GbE connectors

    USB:
    2 x USB 3.1 Gen1 Type-A

    VGA: 
    1 x DB-15 VGA connector
     
    Cooling
    Middle:
    4 x 80x38mm hot swap fans
     
    Operating Environment
    Storage temperature : -10ºC(14ºF) ~ 60ºC(140ºF)
    Operating temperature : 0ºC(32ºF) ~ 35ºC(95ºF)
    Storage operating humidity : 5%~95% non-condensing
     
    Included Items
    System Management
    IPMI 2.0
    KVM over IP
    Media redirection
    Temperature, fan, voltage, PSU sensor monitor
    System temperature
    System ID / System fail indicator
    Remote power on/off/reset
    SEL message alarm through mail
    SNMP support
     
  • SYS-211GT-HNTF
    SYS-211GT-HNTF
    $8,349.00
    SKU
    SYS-211GT-HNTF 
    Processor
    (per Node)
    CPU:
    Single Socket E (LGA-4677)
    5th Gen Intel® Xeon® / 4th Gen Intel® Xeon® Scalable processors
    Supports Intel Xeon CPU Max Series with high bandwidth memory (HBM)​

    Core Count:
    Up to 64C/128T; Up to 320MB Cache

    Note:
    Supports up to 350W TDP CPUs (Air Cooled)
     
    Memory
    (per Node)
    Memory:
    Slot Count: 16 DIMM slots/2 Channels
    Max Memory (2DPC): Up to 4TB 5600MT/s ECC DDR5 RDIMM
     
    Chassis
    2U Rackmount Chassis
     
    Dimensions
    Height:
    3.46" (88mm)
    Width:
    17.67" (449mm)
    Depth:
    28" (711.2mm)
     
    Front Panel
    Buttons:
    Power On/Off button
    UID button
    LEDs:
    HDD activity LED
    Network activity LEDs
    Power status LED
    Universal Information (UID) LED
     
    Bios
    BIOS Type:
    AMI 32MB Flash ROM
     
    Onboard Devices
     (per Node)
    Chipset:
    Intel® C741
    Network Connectivity:
    Via IO Module
    IPMI:
    Support for Intelligent Platform Management Interface v.2.0
    IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
     
    HDD Drive Bays
    (per Node)
    Hot-swap:
    4x 2.5" hot-swap NVMe/SATA drive bays (4x 2.5" NVMe dedicated)
    M.2:
    2 M.2 NVMe OR 2 M.2 SATA3
     
    Expansion Slots
    (per Node)
    PCI-Express (PCIe):
    1 PCIe 5.0 x16 slot(s)
     
    Power Supply
    Redundant 2200w Titanium Level(96%)High-Efficiency Power Supplies with I2C & PMBus
    Dimension (W x H x L):
    106 x 84 x 245 mm
    AC Input:
    100-127Vdc (1200W for the Rest of the World)
    200-220Vdc (1800W for the Rest of the World)
    200-220Vdc (2090W for North America - UL & cUL)
    220-230Vdc (1980W for the Rest of the World)
    220-240Vdc (2200W for North America - UL & cUL)
    230-240Vdc (2090W for the Rest of the World)
    Certification:
    Titanium Level
     
    Input Output
    (per Node)
    LAN:
    1 RJ45 Dedicated BMC LAN port
    USB:
    2 USB 3.0 port(s) (2 USB)
    Video:
    1 VGA port(s)
     
    Cooling
    2x 16.5K RPM Heavy Duty 8cm Fan(s)
    2x 16K RPM Heavy Duty 8cm Fan(s)
     
    Operating Environment
    RoHS:
    RoHS Compliant
    Environmental Spec.:
    Operating Temperature:
       10°C ~ 35°C (50°F ~ 95°F)
    Non-operating Temperature:
       -40°C to 60°C (-40°F to 140°F)
    Operating Relative Humidity:
       8% to 90% (Non-Condensing)
    Non-operating Relative Humidity:
       5% to 95% (Non-Condensing)
     
Refine
Category
Manufacturer
Price Range
Keyword